Functions:

Adopt multi pole insurance design.

Access control power box Built in dual voltage DC12V output.

Support PUSH- drive unlock.

Support relay switching control output.

Built-in adjustable knob lock delay 0-15 seconds.

Photoelectric isolation input unlock, support all kinds of building intercom.

UPS battery management, support 12V7.2Ah battery.

support two groups working indicator, working instruction and battery instructions.

Features:

1. Access control power box AC input:220V/50HZ, DC Output:regulated 12V, the standard output current 3A/5A;

2. The direct control of the electronic locks, access control can reduce the load, interference, save project wiring, reducing failure risks;

3. Set NO/NC (normally open/ normally closed)interface,can control various types of electronic locks;

4. Set time delay circuit,lock time can be adjusted in the 0-15 seconds;

5. Automatic protection function,causing a short circuit when the circuit accident occurs, Access control power box will be temporarily disconnected or burning fuse;

6. Remote control,remote control module can be inserted using the remote control to open the door remotely.(Remote from Leaving Wide ground without interference of 80 meters)

Access control power box Size:

Dimensions:205mmH x 165mmWx 74mmD(large box)

180mmL x 80mmW x 60mmH (small box)

Cabling Instructions:

1-2: Regulated output DC12V,1 positive, 2 negative.

2-3: Open button connection terminal can be connected to switch output(relay output).

3-4: Low-frequency signal output, connected to access controller signal lines.

4-5: NO -GND, normally open no power output, trigger output DC12V-17V, 4 positive 5 negative.

5-6: NC -GND, normally closed output DC12V-17V, triggering power outages, 6 are positive, 5 negative.

6-7: The high-frequency signal output, on the positive lock.

7-8: Connect the host building intercom lock signal input interface, 7L +, 8 of L - + 8, - 9 for the building intercom unlock signal, L +, L - input port, or as high as + 8 radio frequency input, - 9 is low frequency input(this only C plate).