product_img1

FC-181E/M RFID card reader

৳0 ৳0
(0)

Product Specification

Working Voltage: DC10.8 - 13.8V >Standard 12V

Antenna: Build in

Working Current: 50-70mA

Communication Distance: 120m

Transfer Way: Real-time

Reading Speed: < 0.2s

Reading Spacing: < 0.5s

Operating Humidity: 10-90%

Speaker: buzzer

 

LED: Built in three groups

Working Temperature: -0℃ to +65℃

Reading Frequency: 125KHz / 13.56MHz

Device Color: Silver + Grey

Dimensions: FC-181 (long section) 114.7*74.6*17mm, FC-181 (square section) 87.2*87.2*17mm

Models: FC-180E, FC-180M, FC-180H, FC-180S

Networking: Wiegand 26 bits/Wiegand 34 standard format data output

Shell Material: PVC and Spray-painting

Reading Distance: 0-60mm (ID Card), 0-50mm (Mifare Card)

 

Introduction:

When the card close the card reader, the reader red light will change into green light, flash 1s then into red light, buzzer sounds once time means sending data, same ID card, if reading interval shorter than 500ms between two times reading, the second times reading is invalid. After reading, if the card still in the RF area it will not do any response. Different card separately into RF area, it will continuously to read card and output data.

Wiring Instructions:

FC-181 access card reader provides Wiegand 26 or 34 format output, provides LED control and BEEP control line.

+12V: Working voltage: DC10.8-13.8V -> standard DC 12V

GND: Ground

DO: Data 0

D1: Data 1

LED: Light - emitting diode

BUZ: Buzzer

FOR: WG26/34

 

 

  • Model: FC-181E/M
  • Brand: FCARD
  • Made In: China
  • 30 Day Return Policy
  • Cash on Delivery available
    • Share: